HomeFault codes › P0325
OBD2 · FAULT CODE

P0325 — Knock Sensor 1 Circuit (Bank 1)

Moderate severity

What it means

P0325 is stored when the engine control unit sees a fault involving the bank 1 knock sensor circuit. The knock sensor listens for detonation (pinging) so the control unit can retard ignition timing to protect the engine. The control unit has flagged this circuit or signal as outside its normal operating range.

Common symptoms

Likely causes

What to check first

  1. Inspect the connector and wiring for damage, corrosion or loose pins
  2. Inspect the bank 1 sensor connector and wiring routing
  3. Verify the sensor is torqued correctly to the block

Can you keep driving?

Drivable, but the engine may pull timing and lose power; prolonged pinging can cause damage, so diagnose soon.

Scan, log and diagnose with MechanicAI

Plug a Bluetooth OBD2 adapter into your car and let MechanicAI turn raw data into answers:

Related codes

⚠ Important notice & disclaimer

All information, explanations and guidance on this page are general preliminary information only. They are estimates and may be entirely wrong, incomplete or inaccurate, or may not apply to your vehicle at all. Never take any action based on this content alone — do not decide to keep driving, clear codes, replace parts, repair or otherwise work on your vehicle based only on what you read here. In every case, and for any final decision, you must consult qualified technical personnel (a professional mechanic, an authorized service centre or an engineer) and obtain their approval before acting. MechanicAI accepts no liability or responsibility whatsoever for any damage, fault, injury, loss or outcome that may arise — directly or indirectly — from using or relying on this information, for any reason and under any circumstances. By using this page you acknowledge and accept these terms.