P0760 — Shift Solenoid C
Moderate severityWhat it means
P0760 is stored when the engine control unit sees a fault involving shift solenoid C. Shift solenoid C directs transmission fluid to engage the right clutches for a gear change; a fault can cause wrong, harsh or missing shifts. The control unit has flagged this circuit or signal as outside its normal operating range.
Common symptoms
- Harsh, wrong or missing shifts
- Stuck in one gear or limp mode
- Transmission warning light
Likely causes
- A wiring, connector or ground problem in the circuit
- A failed sensor or actuator in the circuit
- A stuck or failed shift solenoid C
- Dirty/low fluid or a wiring/connector fault
What to check first
- Inspect the connector and wiring for damage, corrosion or loose pins
- Check transmission fluid level and condition
- Inspect the solenoid connector and test its resistance and operation
Can you keep driving?
Limp mode protects the transmission; avoid extended driving until it is diagnosed to prevent damage.
Frequently asked questions
What is the most common cause of P0760?
The most likely cause is: A wiring, connector or ground problem in the circuit. Several other faults can set P0760 as well, so confirm the real cause with live data and the checks above before replacing any parts.
Can I just clear P0760 and keep driving?
Clearing P0760 with an OBD2 scanner turns the warning light off, but if the underlying fault has not been repaired the code will usually come back within a few drive cycles. Fix the cause first, then clear the code to confirm the repair worked.
How serious is P0760?
P0760 is a moderate-severity code. The car is often still drivable, but have it diagnosed soon — the underlying problem can get worse and it may fail an emissions test.
Scan, log and diagnose with MechanicAI
Plug a Bluetooth OBD2 adapter into your car and let MechanicAI turn raw data into answers:
- Scan, read and clear fault codes in seconds
- Inspect every sensor with live data
- Create instant logs and automatic trip records
- And above all — analyze it all with AI for the most likely cause and clear next steps.
Related codes
All information, explanations and guidance on this page are general preliminary information only. They are estimates and may be entirely wrong, incomplete or inaccurate, or may not apply to your vehicle at all. Never take any action based on this content alone — do not decide to keep driving, clear codes, replace parts, repair or otherwise work on your vehicle based only on what you read here. In every case, and for any final decision, you must consult qualified technical personnel (a professional mechanic, an authorized service centre or an engineer) and obtain their approval before acting. MechanicAI accepts no liability or responsibility whatsoever for any damage, fault, injury, loss or outcome that may arise — directly or indirectly — from using or relying on this information, for any reason and under any circumstances. By using this page you acknowledge and accept these terms.