P0562 — System Voltage Low
Moderate severityWhat it means
P0562 is stored when the engine control unit sees a fault involving the system (battery/charging) voltage. This code tracks the supply voltage the control unit runs on; out-of-range voltage can upset many systems at once. A “low” reading means the signal is stuck near the bottom of its range, which usually points to a short to ground or an internally failed sensor.
Common symptoms
- The live reading sits abnormally low or at zero
- Battery or charging warning light
- Dim lights or erratic electronics
- Hard starting or stalling
Likely causes
- Signal wire shorted to ground
- Internally failed sensor pulling the signal low
- Weak battery or failing alternator
- Poor ground, loose terminal or corroded cable
What to check first
- Compare the live signal against a known-good range and check for a short to ground
- Measure battery voltage (engine off) and charging voltage (engine running)
- Inspect the battery terminals and main grounds
Can you keep driving?
Charging faults can leave you stranded; if the battery light is on, treat it as urgent.
Scan, log and diagnose with MechanicAI
Plug a Bluetooth OBD2 adapter into your car and let MechanicAI turn raw data into answers:
- Scan, read and clear fault codes in seconds
- Inspect every sensor with live data
- Create instant logs and automatic trip records
- And above all — analyze it all with AI for the most likely cause and clear next steps.
Related codes
All information, explanations and guidance on this page are general preliminary information only. They are estimates and may be entirely wrong, incomplete or inaccurate, or may not apply to your vehicle at all. Never take any action based on this content alone — do not decide to keep driving, clear codes, replace parts, repair or otherwise work on your vehicle based only on what you read here. In every case, and for any final decision, you must consult qualified technical personnel (a professional mechanic, an authorized service centre or an engineer) and obtain their approval before acting. MechanicAI accepts no liability or responsibility whatsoever for any damage, fault, injury, loss or outcome that may arise — directly or indirectly — from using or relying on this information, for any reason and under any circumstances. By using this page you acknowledge and accept these terms.