P0150 — O2 Sensor Circuit (Bank 2, Sensor 1)
Low severityWhat it means
P0150 is stored when the engine control unit sees a fault involving the upstream oxygen sensor on bank 2 (sensor 1). On V-type engines, bank 2 is the cylinder bank opposite cylinder 1; this upstream sensor trims fuel for that bank before the converter. The control unit has flagged this circuit or signal as outside its normal operating range.
Common symptoms
- Rough running or higher fuel use
- Check engine light
- Failed emissions test
Likely causes
- A wiring, connector or ground problem in the circuit
- A failed sensor or actuator in the circuit
- Aged or contaminated bank 2 oxygen sensor
- An exhaust leak near the sensor
What to check first
- Inspect the connector and wiring for damage, corrosion or loose pins
- Compare bank 1 and bank 2 sensor behaviour in live data
- Inspect the bank 2 exhaust and sensor wiring
Can you keep driving?
Drivable short-term; like any fuel-control sensor it wastes fuel and stresses the converter, so repair soon.
Scan, log and diagnose with MechanicAI
Plug a Bluetooth OBD2 adapter into your car and let MechanicAI turn raw data into answers:
- Scan, read and clear fault codes in seconds
- Inspect every sensor with live data
- Create instant logs and automatic trip records
- And above all — analyze it all with AI for the most likely cause and clear next steps.
Related codes
All information, explanations and guidance on this page are general preliminary information only. They are estimates and may be entirely wrong, incomplete or inaccurate, or may not apply to your vehicle at all. Never take any action based on this content alone — do not decide to keep driving, clear codes, replace parts, repair or otherwise work on your vehicle based only on what you read here. In every case, and for any final decision, you must consult qualified technical personnel (a professional mechanic, an authorized service centre or an engineer) and obtain their approval before acting. MechanicAI accepts no liability or responsibility whatsoever for any damage, fault, injury, loss or outcome that may arise — directly or indirectly — from using or relying on this information, for any reason and under any circumstances. By using this page you acknowledge and accept these terms.